Now Shipping with Runcam Micro/ATX03 Top Plate and mounts also .
- 168mm motor to motor True X design
- Supports 130X 140X 170X 180X motors with M2 screw base.
- Super low profile @15mm using included Nylon Standoffs.
- weights only 41g including the TX03 Camera mount/lens shield.
- Main Plate comes @ 30.5g High Quality Japanese CF 100% 3K Twill.
- 30.5x30.5mm & 20x20mm Mounting holes to adapt both Standard and mini Size Flight controllers
- Frame supports 4" & 3" prop sizes (Pending 4.5" tests ;))
- Advanced PLA+ 3D Ingeo 3D870 parts and soon in different filaments
- Included TX03 Mount allows for 0-65 degrees camera angle
Package content :
- 1x RotoRev Antidote 100% 3K Twill Japanese Carbon fiber @ 3.4mm
- 1x APLA+ 3D Printed Top Plate.
- 1x APLA+ 3D Printed Camera Case ( fits Eachine TX03 )
- 1x APLA+ 3D Printed Lens Shield ( with steel embedded M2 nuts for mounting)
- 4x M3 15mm Nylon Standoff
- 4x M3 15mm Nylon Screws
- 8x M3 Nylon Nuts
- 8x Damper silicone orings
- 8x Titanium M3 8mm screws
- 2x M2 6mm steel screws
- 2x 16mm straps
- 1x 16awg XT30 pigtail
We recommend using 4 screws for motor mounting & locktite so that excessive tightening isn't needed as you see below "right side" example of over tightened screw
which compromises arm at that point. That being said we recommend using M2 washers to avoid that issue.
All New Kits will include M2 washers.
BFF3 180 degree rotation (SD slot up ) instructions
# resource MOTOR 3 none
# resource MOTOR 4 none
# resource MOTOR 1 B08
# resource MOTOR 2 B09
# resource MOTOR 3 A06
# resource MOTOR 4 A07
This product hasn't received any reviews yet. Be the first to review this product!
Customers also viewed