You have of store credit. To use it, simply place your order and you will be able to choose store credit as the payment method when it comes time to pay for your order.
Specs:XSD12A Solder VersionBLHeli_S ESC with Hardware generated PWM synchronous to MCU yields ultra-quiet motor performance.Utilizes high-performance EFM8BB21 50MHz MCUWeight: 1.12gInput voltage: 2-3s LipoSize(mm)L*W: 15...
FIRMWARE & BLHeli: http://www.blheli32.com/download/
Standard-sized MOSFETFirmware:BLHELI_32 bitinput :2-4SCont Current:30ABurst current:40ASize: 23x14x5mmWeight : 6g Support...
Spedix ES20 Lite is an ultra-light and ultra-small ESC beyond imagination. It is a performance speed controller designed for 100-210 size racing multirotors. With the devote of our engineers, the size and weight of the ESC...
The Spedix IS30 sets a new standard for 4in1 ESCs. Many ESCs used in FPV racing quads are equipped with 3.3x3.3mm MOSFETs. Chips of this dimension are typically lower in efficiency and reliability. With the same...
Continuous Current: 40A
Peak Current (10s): 45A
Size: 32 x...
BEC: 5V / 3A
Peak Current(10s): 10A
BEC: NO /OPTO
PCB Size: 18*11mm
MCUs: BusyBee2 (EFM8BB21F16) at 48MHz
Supported Protocols: Oneshot125/42,...
Spedix ES30-HV is the smallest and lightest 6S 30A speed controller in the category so far. It is designed for 150-300 size racing multirotors that have strict demand on power, size, and weight. This ESC use 6...
Spedix ES25 speed controller is designed for 150-280 size racing multirotors. The product is powered by high performance EFM8BB21 MCU, and flashed with the latest BLHeli_S program. With the combination of dedicated drive...
BEC: NOWeight: 8.7gInput Voltage: 3-6s LipoMCU: Silabs EFM8BB2Size(mm)L*W*H: 45*16.5*5.8mmFirmware: BLHeli Bootloader &...
Weight: 4.49gInput Voltage: 3-4s LipoMCU: Silabs EFM8BB2Size(mm)L*W*H: 24*14*4.5mmFirmware: BLHeli Bootloader &...
Please update esc to latest Blheli_s 16.4
Input Voltage: 2-6S Lipo
Opto: No Bec
Continue Current: 30A - Burst Current: 35A up to 10S
Supported Protocols: Oneshot125,...
Please update esc to latest Blheli_s 16.6 with AH_25 / AH_50 for motors > 2300kv
If you plan on using the LB20s with high kv motors, that being 2400kv and above , manufacturer recommends...
Input Voltage: 2-6S Lipo
BEC Output: No
Continue Current: 30A, Burst Current:35A up to 10S
Weight: 11g(including Wire)
Support Damped mode
Input: 2-4s LipoConstant: 20 AmpsBurst: 30 Amps(10 seconds)Weight: 6~7g w/wiresDimensions: 24.5 x 12.5 x 3mmMotor wire: 50mm 20gSignal wire: 100mm 22gMCU: Silabs F396 @ 48MhzPCB - 4 Layer Blind Pole...
Item Name: XMS30A mini versionInput voltage: 3-6s LipoBEC: NOType:BLHeli Bootloader & FirmwareWeight: 9.26gSize: 32*15mmFeature: Silabs F396, Oneshot125/Multishot...
Copyright 2018 Rotorev. All Rights Reserved. | Sitemap |
Bigcommerce Premium Themes by PSDCenter
All prices are in USD