Flight Controllers

Latest HF32 3.5 seems to have best current performance, can be installed below: https://hf32.neutron-rc.com/ * BETAFLIGHT 4.5.0 is under development section and seems to run great, as any development FW use it on ur own risk. otherwise you can stay with...

Latest HF32 3.5 seems to have best current performance, can be installed below: https://hf32.neutron-rc.com/ * BETAFLIGHT 4.5.0 is under development section and seems to run great, as any development FW use it on ur own risk. otherwise you can stay with...

NOTES: Latest RC betaflight/atbetaflight firmware coule be found HERE Target is NEUTRONRCF435SE For now ONLY use betaflight configurator BETA to be found HERE future Betaflight 4.5.X to start support AT32 natively soon  for ESC Conf. use web ESC...

  GOKU Versatile F411 1S 5A AIO V2.0 is another versatile and highly integrated circuit board in the GOKU Versatile series!  Built-in ELRS 2.4g RX ，1S 5A ESC， OSD, 3 serial ports， I2C functionality  and 2XWS2812 LEDs . ...

Model F722 V4 CPU STM32F722RET6 Power Supply 3~6S Lipo (11V~30V) BEC Output DC5V/3A; DC9V/3A OSD BF OSD Black Box 16M Flash Memory UART 6 Set ESC Telemetry RX4 Buzzer YES Smart...

Model Mini F722 V4 Pro CPU STM32F722RET6 Power Supply 2~6S Lipo (6.5V~30V) BEC Output DC5V/3A OSD BF OSD Black Box 16M Flash Memory UART 4 Set ESC Telemetry RX4 Buzzer YES Smart...

MAMBA Basic F722 MINI MK3 Diagram Link From Help Centre Link Fixed Add I2C function When you connect the USB, the receiver and OSD settings can be saved Increase the pad area LED signal selection （when Mamba Led sys avaiable） BEC short circuit...

FC Specifications MCU: 100MHz STM32F411 IMU: MPU6000 accelerometer/gyro (SPI) Baro: BMP280 (I2C) OSD: INAV OSD w/ AT7456E chip Blackbox: No VCP & 2x UARTs 2x Motors, 5x Servos outputs 1x I2C 3x LEDs for FC STATUS (Blue, Red) and 3.3V...