Description
Tattu R-Line Version 5.0 1550mAh 6S 22.2V 150C LiPo battery pack is the updated version of R-Line series in 2024.
What is R-Line? Designed for professional FPV racing, R-Line stands out with its enhanced capacity, reduced internal resistance, and lower temperatures upon landing, R-Line batteries are engineered for peak performance. R-Line offers diverse versions tailored to meet the specific demands of various FPV racing events.
The Version 5.0 uses exclusive technology Al Boehmite, which will offer a significant improvement in overall performance and continuous power output.
Specifications:
- Minimum Capacity: 1550mAh
- Configuration: 6S / 22.2V / 6 Cells
- Discharge Rate: 150C
- Net Weight(±20g): 254g
- Dimensions: 78mm x 37mm x 52mm (L x W x H)
- Charge Plug: JST-XHR
- Discharge Plug: XT60
What have improved?
- First use of X technology Al Boehmite
- Highly consistent and continuous power output
- Less decrease in performance after cycles
- Higher discharge platform
- Resistance to dropping
What Tattu Pilots said?
- Corey Tapp: Super long flight times with the 6s 1400mah.
- DarKex Killian Rousseau: The voltage drop IS still very good like 20.5 or 21v while i'm flying.
- Jake Capobres: The 1200 is the best battery I have flown. It had really good power for it's weight. It hold voltage very constant as well.
- Thomas Bitmatta: Its ~3% more speed per lap! anything 3% or higher is something that can be felt comfortably without data, its good!!
- Lukáš Košata: I am really impressed with the performance, there is almost no voltage sag.
- TERRY ARSCOTT: We were flying in 35deg temperature charging outside and still got no battery sag. The biggest difference is how long it holds voltage for. I didnt feel a drop in power until the battery was almost dead.
- Walter Kirsch: From my reading in the FPV Goggles I could tell, that the v5 was having less voltage drop. After 3, 5, 10 and even 20 full cycles now I cannot tell a difference between a new v5 and a used one. I did test a 20 cycle old vs.
Brand: | Tattu |
sorting: | TattuFPV |
Part Number: | TAA15506S15X6 |
Capacity(mAh): | 1550 |
Voltage(V): | 22.2 |
Configuration: | 6S1P |
Discharge Rate (C): | 150C |
Connector Type: | XT60 |
Length(±5mm): | 78 |
Width(±2mm): | 37 |
Height(±2mm): | 52 |
Net Weight(±20g): | 254 |
upc: | 889551119474 |
Part N: | TA-RL5-150C-1550-6S1P |
Discharge Wire Length(mm): | 45mm |
Wire Gauge: | 12# |
Balancer Connector Type: | JST-XHR-7P |
Balancer Wire Length(mm): | 45mm |
Preorder config: | / |
Amount: | 24pcs/box |