Tattu R-Line Version 5.0 1400mAh 22.2V 150C 6S1P Lipo Battery Pack With XT60 Plug

Specifications:

• Minimum Capacity: 1400mAh
• Configuration: 6S1P / 22.2V / 6 Cells
• Discharge Rate: 150C
• Max Burst Discharge Rate: 260C
• Net Weight(±20g): 222g
• Dimensions:78mm x 39mm x 42mm (L x W x H)
• Charge Plug: JST-XHR
• Discharge Plug: XT60

What have improved?

1. First use of X technology Al Boehmite
2. Highly consistent and continuous power output
3. Less decrease in performance after cycles
4. Higher discharge platform
5. Resistance to dropping

What Tattu Pilots said?

• Corey Tapp: Super long flight times with the 6s 1400s.
• DarKex Killian Rousseau: The voltage drop IS still very good like 20.5 or 21v while i'm flying.
• Jake Capobres: The 1200 is the best battery I have flown. It had really good power for it's weight. It hold voltage very constant as well.
• Thomas Bitmatta: Its ~3% more speed per lap! anything 3% or higher is something that can be felt comfortably without data, its good!!
• Lukáš Košata: I am really impressed with the performance, there is almost no voltage sag.
• TERRY ARSCOTT: We were flying in 35deg temperature charging outside and still got no battery sag. The biggest difference is how long it holds voltage for. I didnt feel a drop in power until the battery was almost dead.
• Walter Kirsch: From my reading in the FPV Goggles I could tell, that the v5 was having less voltage drop. After 3, 5, 10 and even 20 full cycles now I cannot tell a difference between a new v5 and a used one. I did test a 20 cycle old vs.